Showing posts with label battery life. Show all posts
Showing posts with label battery life. Show all posts

Thursday, November 18, 2010

Battery Life - Keeps getting better

Engadget editor Chris Ziegler recently reviewed Motorola's new Defy.  In case you forgot, this is Motorola's new 'party phone', water resistant, scratch-proof screen, something about rolling around in the sand (watch the commercial...).  This is also the Oprah phone... the phone given to the audience members of Oprah's first show of her last season.

But I don't want to talk about all that.  The Defy comes with Wi-Fi Calling.  Some industry commentators continue to propagate the rumor that excessive Wi-Fi use drains a smartphone's battery.  That may be the case, unless that phone has Smart Wi-Fi technology.

In Chris' review, he actually credits Wi-Fi, and Wi-Fi Calling (aka Smart Wi-Fi), as the reason why the battery performance was "stellar."

"In our experience, the Defy seems to have stellar battery life, which is relatively hard to come by among Android phones. Not only we were able to consistently make it comfortably through an entire day on a charge, but we were surprised to find that after putting the phone away with about 75 percent charge, it was still on with 21 percent remaining two days later. Granted, it spent most of that time in WiFi calling range (which disables the cellular radio), but many smartphones give up the ghost from 100 percent charge in less time, so we were pleased to see that." 
Smart Wi-Fi... actually making Wi-Fi on Smartphones 'smarter'.

Tuesday, October 07, 2008

Wi-Fi to 1 billion

Analyst firm In-stat recently updated its market forecast for Wi-Fi chips, projecting nearly a billion Wi-Fi enabled consumer devices by 2012. Most interesting for us at UMA Today is the claim that by 2011, cellular/Wi-Fi handsets will become the largest category of Wi-Fi enabled products.

No surprise here. Wi-Fi is now friendly for mobile operators. The benefits of improved coverage, mobile network offload, and home zone services are clear.

But it was the comment in the CNET article by Marguerite Reardon that hit the mark.

“Over the past few years, prices on Wi-Fi hardware have come way down. And the battery life for devices using Wi-Fi has improved dramatically, making it possible to embed Wi-Fi in handheld devices like cell phones.”

Poor battery life is a myth that has perpetuated too long in the dual-mode market. As with most technologies, market demand also demands innovation. UMA and Wi-Fi in handsets requires innovation over Wi-Fi embedded in a laptop. Several vendors have stepped up to make dramatic improvements in Wi-Fi, optimizing it for a handset environment.

Friday, September 26, 2008

Nanoradio Turns On UMA

Nanoradio is a Swedish-based fabless semiconductor supplier that has developed a unique WLAN chipset which features ultra-low power consumption, the smallest package (their claim) and ‘unique’ support for audio applications.

If you think this would be perfect for a UMA-enabled handset, apparently you’re not alone.

Today Nanoradio issued a press release stating its technology is in the world’s first 3G UMA handset. At first I thought they meant the Sony Ericsson G705u, but in fact they were talking about the Samsung P270, quietly announced in Orange’s press release about expanding Unik to support 3G devices.

In a follow-on article, the company refers to an as yet unannounced UMA device, the Samsung P250. Excellent.

The article also mentioned that the Nanoradio ‘…Wi-Fi solution doubles the standby and talktime...’ when in UMA. Not bad, considering UMA already outperforms cellular for some RIM devices.

From the company’s web site, Nanoradio suggests its WLAN chip uses just 6mW in a voice call, compared with 37mW for Bluetooth 1.2 and 50 mW for Bluetooth 2.0. Very impressive.

It’s clear that Nanoradio is dispelling the myths about Wi-Fi being power hungry. With ABI Research predicting more than 300 million dual-mode phones in the coming years, the future looks very bright.

Friday, May 16, 2008

Wi-Fi Battery Life: UMA Wins Again

Last month PC Magazine reviewed the RIM Blackberry 8820. The review was quite positive, but one thing which really jumped out at me was this paragraph (second to last in the article):

One area where the 8820 really excels is in endurance; it beats the Curve 8320, although the 8320's performance isn't shabby. On a cellular talk time rundown test, the 8820 lasted 11 hours and 29 minutes with the Wi-Fi and Bluetooth radios turned off. Over UMA and Wi-Fi, the phone ran for almost 14 hours on the same test. If you're tired of your cell phone's short battery life, this device should be on your short list.

Or as they state in the article:

  • Continuous talk time (cellular): 11 hours 29 minutes
  • Continuous talk time (Wi-Fi): 13 hours 55 minutes

An all too common complain about dual mode phones is that Wi-Fi = poor battery life. Yet in PC Magazine’s own test, talking over Wi-Fi/UMA resulted in a 20% improvement in talk time/performance.

The evidence continues to mount that those issues are a thing of the past. Companies that are serious about Wi-Fi in devices are optimizing the performance to meet and many times exceed the performance of GSM only.

Monday, March 10, 2008

Apple vs Blackberry in the enterprise? RIM has the edge.


Last week Apple made noise about opening the iPhone up to developers to support more enterprise oriented applications.

UMA’s standard position on applications is “If they work over GSM, they’ll work better/faster/cheaper over Wi-Fi and UMA!” It’s a good (and easy) position to be in.

Given UMA technology is basically agnostic to applications running above it (even SIP), why would UMA Today weigh in on an enterprise applications battle between the Blackberry and Apple?

Frankly, it’s because UMA gives RIM an edge.

Let me explain.

These heavy duty devices are always struggling with power usage. One of the banes of ‘smart phones’ with big screens and lots of features is battery performance, and it’s here, deep inside these enterprise devices, that UMA gives RIM the edge.

Consider how UMA works:

When a UMA-enabled device moves within range of Wi-Fi, the handset establishes a direct IP tunnel to the mobile core network using the Wi-Fi radio. Once in place, all mobile services (voice, SMS, MMS, …) are tunneled to the phone over IP. Because the GSM/3G radio is no longer used, it is put into a hibernation mode. In effect, only one RAN radio is powered on concurrently with UMA. That’s pretty efficient.

Compare this with how an iPhone, or any non-UMA dual-mode phone (think Nokia E and N) works. When the iPhone moves into Wi-Fi coverage, the Wi-Fi radio powers on. But there is no connection from the Wi-Fi radio to the mobile core network. Therefore, for users to receive cellular services (ie 'a phone call'), the GSM radio must remain on, concurrently with the Wi-Fi radio.

That sucking sound you hear is the battery on the iPhone draining…

That’s not fair, it’s not specific to iPhones, it’s the same with any dual-mode E or N series from Nokia that doesn’t have UMA.

This is a fundament advantage over any non-UMA dual-mode handset. Any time you see or hear someone complaining about ‘Wi-Fi battery life’, you can be sure they are talking about a non-UMA device.

Monday, August 27, 2007

All dual-mode phones are NOT alike

A common misconception is that all dual-mode phones are the same. Many people consider Wi-Fi enabled phones to be expensive and have poor battery life.

I’d like to dispel this myth by making a distinction between UMA and non-UMA enabled devices. I concur that non-UMA dual-mode handsets are often higher end (and therefore more expensive) and have poor battery performance (when in Wi-Fi). However, UMA-enabled devices are often mid-tier feature phones with respectable if not ‘stellar’ battery performance.

Fundamentally, UMA is a technology for mobile operators. It is designed to make Wi-Fi (and IP and broadband) ‘friendly’ to the mobile operator. So, what is UMA’s secret?

When a UMA-enabled dual-mode phone enters a known Wi-Fi coverage area (home, office), the phone automatically and seamlessly switches from the GSM network to the Wi-Fi network. Now the connection between the phone and the mobile network is over the public internet rather than the GSM radio access network. Because it’s not used when the phone is in Wi-Fi coverage, the GSM radio is put into a sleep/hibernate mode.

If/when a call arrives for the handset, the call is routed through the UMA tunnel over the internet to the handset, and the GSM radio is not used.

This is one key element of improving battery performance in UMA-enabled handsets. By putting the GSM radio in a sleep mode, the phone continues to run a single radio. Anyone who has run their Bluetooth radio all day knows that having two radios on in a phone significantly impacts the battery performance.

Contrast this with the operation of a non-UMA dual-mode phone. As the phone enters a known Wi-Fi location, generally the user needs to turn on or enable the Wi-Fi radio. Primarily this is because the battery impact is so great that ‘automatic’ Wi-Fi usage would have the un-intended consequence of sucking the battery dry.

Now with the Wi-Fi radio is operating and associated with an access point. But to make or receive GSM calls, the GSM radio must remain on as well. In a non-UMA device, the only connection between the mobile core network and the handset is over the existing GSM link. In this case, Wi-Fi is simply a bolt-on to the phone’s primary function as a GSM communications device.

There are many implications of this ‘bolt on’ approach.

First, people with non-UMA devices don’t use the Wi-Fi connection much if at all. The performance hit to the handset is too great for regular usage. Certainly with iPhone, the largest selling dual-mode device on the market, most people tend to use the EDGE data connection rather than Wi-Fi.

Second, there is no session mobility for non-UMA devices. Start surfing on the Wi-Fi connection, and if you walk out the door to GSM, that connection is lost. Wi-Fi and GSM are typically completely different subsystems on a non-UMA device. Of course with UMA, there is full session mobility for voice, data and IMS applications between Wi-Fi and the GSM network.

Third, because Wi-Fi is typically bolted onto a non-UMA device for basic data services, the Wi-Fi sub-system is not optimized for a mobile device. This was a common problem for the first UMA-enabled handsets. The Wi-Fi subsystems were simply ported from laptops and behaved like they were running on (relatively) power in-sensitive devices like PCs rather than on handsets.

Companies like NXP have invested tremendous resources in optimizing Wi-Fi (radio, stacks) to be voice-centric rather than laptop/PC centric. This optimization has paid off well, as the performance of their t409 product achieves 8 hours of talk time in Wi-Fi, according to one analyst.

Many see dual-mode devices as the next growth opportunity for Wi-Fi. This is certainly true. But there is a big difference between non-UMA and UMA-enabled devices.